Teradek 1000 XT

The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, 480p and 576p are only supported via HDMI. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.

Procam NY Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter

With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, two M3 threaded holes, and a built-in 3/8″-16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000′ line-of-sight.

A shoe mount is included for attaching to cameras without 1/4″-20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

• Compatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt
• HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
• 5 GHz Spectrum Analyzer
• Manual channel selection
• Supports 11 channels in the 40 MHz band
• SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
• 1/4″-20 and M3 mounting points

Procam NY Bolt 1000 XT 3G-SDI/HDMI Wireless Receiver

With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 1000 transmitter with zero latency. The Bolt XT is compatible with the Sidekick II, and 703 Bolt, as well as the Bolt LT. The receiver unit itself can be secured via built-in 1/4″-20 or M3 threaded holes.

A lightstand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES 128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals. The receiver features a built-in 3D LUT engine and a 5 GHz spectrum analyzer so you can find a clean signal path.

• Backwards compatible with Bolt
• 1000 LT, Sidekick II, and 703 BoltThe receiver includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to help you find a clean signal pathway.
• SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
• OLED Screen with Menu Joystick Navigation.
• 1/4″-20 and M3 mounting points
• 5 included antennas for the receiver enable it to pick up signals with clarity